The Master F 60 is a fixed, indirect oil-fired air heater that runs on diesel or kerosene. Fitted with a straightforward room thermostat for regulating temperatures, a high-capacity fuel tank and a 4-sided air plenum, the F 60 is intended for use in commercial and industrial workplaces.
The F 60 is an indirect heater. This means it separates heat production from the combustion process. The result, therefore, is hot air that is unaltered in quality. The oxygen levels are not diminished and combustion by-products such as carbon dioxide and, potentially, carbon monoxide are not added to the air you breathe. In comparison to direct oil-fired heaters, the F 60 can be installed internally, in enclosed spaces.
To maximise heat transfer efficiency, Master has manufactured the F 60’s combustion chamber out of stainless steel. A highly conductive metal, the chamber encloses a burning flame. This flame transfers heat to the wall of the chamber, which then efficiently transfers heat energy to the air that is pulled through the heater. The heated air is then pushed out into the space, warming you and your surroundings up.
To ensure exhaust fumes are safely expelled, the Master F60 comes with an exhaust flue. The flue carries the by-products of combustion to a suitable location. For example, the Idropower office’s BF 35 (a precursor to the F60), is fitted with a flue through our office wall. The fluke carries exhaust safely outside, so it can disperse harmlessly.
Sporting the same size fuel tank (110L) as the thirstier F 80, the F 60 boasts fantastic fuel autonomy. Burning fuel at 4.71 L/h, the F 60 can run continuously for 23 hours before needing a refill.
The thermostatic controls only extend the autonomy of the F 60. Regulating temperature, the thermostat will switch your F 60 off and on as required. Keeping a steady temperature, the F 60 will also not run continuously, extending its running time between refills. (Saving you extra trips back and forth with the fuel can!)
The Master F 60 creates 59.63 kW (203’500 Btu/h) of heat output. To put this into perspective, a home boiler is usually in the region of 30-35kW. Where home boilers are designed to heat the separate rooms of an entire house, the Master F 60 concentrates this extra power in a manner that will make it effective in open commercial and industrial spaces.
Albeit static, the F60 preserves its directionality by boasting a 4-sided air plenum, with closable vents. This means that you can leave the vents open, having your F60 propel heat in all directions. Or, you can close one or two sides and have the heater propel heat in the direction you need it. This is invaluable if you have the heater against the wall, a common installation position. Therefore, you can close the side that would only push heat into the wall.
Cold in the winter, but hot and stuffy in the summer? The F 60 comes with a handy summer function. The summer function isolates the heater's fan element, helping to move that still air in your workshop or warehouse.
Both winter and summer settings use a centrifugal fan to circulate air.
The Master F 60 is a high-powered, stationary and indirect air heater. Manufactured for regulating temperatures in warehouses, workshops, greenhouses and livestock buildings.
If you would like to find out more/enquire about the F 60, or our wider range of heaters, please get in touch via phone at (01652) 659759, the messenger icon (right below) or via our contact form.
Specifications | Units | F 30 | F 60 | F 80 |
Heating Power
|
kW | 27.55 | 59.63 | 79.88 |
Btu/h | 94'000 | 203'500 | 272'550 | |
kcal/h | 23'600 | 51'300 | 68,700 | |
Air Flow | m3/h | 2700 | 6000 | 7800 |
Fuel | Oil: Diesel/Kerosene | |||
Fuel consumption | L/h | 2.18 | 4.71 | 6.32 |
Fuel autonomy | h | 36 | 23 | 17 |
Electric power | kW | 0.69 | 1.36 | 1.8 |
Power supply | V/Hz | 220-240/1ph/50 | ||
Flue tube | mm | 153 | ||
Air Pressure | Pa | 150 | ||
Tank capacity | L | 80 | 110 | |
Product size (LxWxH) | cm | 101x53x174.5 | 104.5x60x192 | 140x64x209 |
Net/gross weight | kg | 161 | 212 | 291 |